I-Rotary Drilling Rig nge-Lock Pipe GR700
Izici Zokusebenza
■ esebenza kahle futhi elondoloze i-turbocharged diseel injini yedizili.
■ Ukudlidliza okuphansi, umsindo ophansi kanye nokuphuma okuphansi.
■ uhlelo oluhle kakhulu lwamafutha.
■ uhlelo lokupholisa okuthuthukile.
■ uhlelo lokulawula oluhlakaniphile.
I-1.Special hydraulic tescopic Crassis chassis classis ye-audelish ye-1.Ububanzi obubanzi, ngokuqina okukhulu kanye nokuhamba okulula;
I-2.Evines yamukela imikhiqizo edume umhlaba wonke ngamandla anamandla, ukonga amandla kanye nokuvikelwa kwemvelo. Izitolo zesevisi ephaketheni ezintathu zonke zikhona ezweni lonke;
3.Isakhiwo esiyinhloko esiphakanyisiwe sentambo yentambo engemuva ye-single-rove sandisa kakhulu impilo yenkonzo yentambo yocingo futhi inciphisa izindleko zokusebenzisa;
Ukucushwa kwamaphayiphu we-4.Various Drill kungakhethwa ukuze kuhlangatshezwane nokwakhiwa kwenqwaba ejulile ye-SHARD e-Hard Stratum;
I-5.hydraulic Circuit System amukela umqondo othuthukile wamazwe omhlaba futhi yakhelwe ngokukhethekile i-rotary dring rig. Inezici zokujikeleza okuzinzile futhi ijubane elisheshayo elikhuphukayo;
6.Ikhanda lamandla aklanywe nge-torque engasindi, eqinile, ukusebenza kahle kokwakhiwa okuphezulu kanye nokushintshwa kwejubane okungathandeki kwama-motors amabili.
Ukucaciswa kobuchwepheshe
| Into yendaba | Umuvo | Umbhalo | ||
| Ibizo | I-Rotary Drilling Rig nge-Lock Pipe | |||
| Isifanekiso | Gr700 | |||
| UMax. Ukujula kokumba | m | 70 | ||
| UMax. Ububanzi bokumba | mm | 1800 | ||
| Umshini | / | Cummins 6BT5.9-C325 | ||
| Amandla alinganiselwe | kW | 242 | ||
| I-rotary drive | UMax. Khipha i-torque | k.m | Ama-220 | |
| Isivinini sokujikeleza | R / Min | 7-27 | ||
| I-Winch Main | Amandla okudonsa alinganiselwe | kN | Umfana no-180 | |
| UMax. Isivinini sentambo esisodwa | m / min | 50 | ||
| I-AUXILY SINGCH | Amandla okudonsa alinganiselwe | kN | 30 | |
| UMax. Isivinini sentambo esisodwa | m / min | 50 | ||
| Ukuthambekela kwe-mast ye-master / phambili / emuva emuva | / | ± 5/5/1 15 | ||
| Ukudonsela phansi isilinda | UMax. Donsela phansi ama-piston Push Force | kN | Umfana no-180 | |
| UMax. Donsela phansi i-Piston Pull Force | kN | Umfana no-180 | ||
| UMax. Donsela phansi i-piston stroke | mm | 5000 | ||
| I-chassis | UMax. Ijubane lokuhamba | km / h | 1.5 | |
| UMax. Ikhono | % | 30 | ||
| Imiz. Ukuvunyelwa komhlaba | mm | I-370 | ||
| Landelela ububanzi bebhodi | mm | 800 | ||
| Ingcindezi yokusebenza yohlelo | I-MPA | 35 | ||
| Isisindo somshini (ngaphandle kwamathuluzi we-drill) | t | 66 | ||
| Ubukhulu obuphelele | Isimo esisebenzayo l × w w h h h h h | mm | I-10260 × 4440 × 22100 | |
| Isimo sezokuhamba l × W w × h h h h | mm | I-16360 × 3250 × 3700 | ||
Izimo:
| ||||
Izinja
Ukuhlelwa kwabasebenzi kanye nemishini ngendlela ethile
